Kalama® VITROFLEX® non-phthalate, benzoate plasticizers have excellent safety and regulatory profiles for polysulfides. They enable formulators to eliminate plasticizers facing scrutiny and regulatory pressure, such as benzyl phthalate and chlorinated paraffins. Because Kalama VITROFLEX Plasticizers have been expressly designed for polysulfides, they also offer excellent performance characteristics, compatibility, and value in this application.
Kalama VITROFLEX A99 is a high-value offering for the A-side of polysulfide sealants. It offers similar benefits to Kalama VITROFLEX A90, including exceptional permanence, low migration, and low fogging. In addition, it maximizes purity to meet the highest performance requirements, such as exceptionally low odor.
Emerald offers solutions for both the A-side (polymer) and B-side (catalyst) of two-part polysulfide sealants. These products are manufactured in Europe, offering an excellent supply chain to serve EMEA customers. Additional solutions for this application include Kalama VITROFLEX A90 and Kalama VITROFLEX B.
|Assay, as benzoate ester, minimum, %||98.0|
|Impurities, individual maximum %||0.999|
|Color, APHA, maximum||100|
|Hydroxyl number, maximum, mg KOH/g||2|
|Moisture content, maximum, %||0.07|
|Assay, as benzoate ester, %||99.7|
|Acidity, as benzoic acid, %||0.02|
|Freeze point, °C||<-20|
|Hydroxyl number, mg KOH/g||0.7|
|Moisture content, %||0.04|
|Specific gravity, 25/25°C||1.1475|
|Viscosity, Brookfield RVT, 20 RPMs at 25°C, cps and mPa·s||95|
|VOC, ASTM D2369, %||3.2|
|FDA CFR Listings|
|21 CFR 175.105||Adhesives (PART 175 – INDIRECT FOOD ADDITIVES: ADHESIVES AND COMPONENTS OF COATINGS, Subpart B – Substances for Use Only as Components of Adhesives)|
Kalama VITROFLEX is a registered trademark of Emerald Kalama Chemical, LLC for its line of benzoate plasticizers. It is not associated with Viking Chemical, ARKEMA, or the VIKOFLEX product line.
Emerald does not warrant that these product(s) are suitable under applicable food additive / food contact regulations of any potential use. The responsibility for determining the overall compliance with applicable food additive / food contact laws and regulations is with the company manufacturing the final consumer product and/or the person placing the products described herein in contact with food. This information is provided in good faith and is believed accurate as of the date of this letter. No warranty is subsequently expressed or implied. Liability is expressly disclaimed.